Based on many years of experience and advanced technological process we created complex tuning car parts production technology. That is why we are able to offer best quality and reliable products. We pay extra attention to every step of the production to ensure that the final product met all the original requirements and was perfect for its function.  

  • 1

    A new concept

    The technological process in PMC Motorsport begins with the apparance of a problem. At first we try to identify the problem and then plan the best way to solve it. A simple example of such a situation is when the modified engine generates so much power and torque that it is too much for the original gearbox. In that case different, stronger gearbox should be installed to handle the power of the new engine. Unfortunately, stronger gearboxes hardly ever can fit therefore a set of parts is necessary to make this modification possible. Similar problems may occure with suspesion modifications and many others, and all of them require improvements.

  • technologiaanaliza-1.jpg

    Analysis and Concept Solution

    Proper diagnosis is an important element in the process of production flawless and safe car parts. As soon as the need has been recognised we can start working on the solution. We analyse the function of the part and decide what modifications are necessary to make it work better. Next we create tools to adapt our solution. In case of the gearbox, we decide what parts are necessary to connect it with the engine, keeping in mind all the modifications of the clutch and other elements.

  • pomiary.jpg


    In order to create the most optimal project of new car parts we must gather as much information as possible. Therefore it is time to make some measurements. At that point we set the criteria the car part must meet. For example, the torque that the cluth should transfer. Next we measure all the interconnecting parts to fit them together perfectly with the new part.

  • before.png


    beforeIn the process of parts designing we must adjust our concepts to the strict requirements. By creating a model of the part we may decide of the size, fit it to the other parts and start making first virtual tests. For 3D designing, analisis and cataloging we use a special program.

  • projektowanie_v2.jpg

    Making a prototype

    Making  prototype is the part of the creation processs we pay special attention to. It shows us that the technological concept we made is possible to produce. During this step we establish the production technology, create programs for CNC lathes, choose the right tools and measurements and plan quality control procedures. Once all the elements are ready we can start the production.

  • testowanie.jpg


    We begin testing phase with checking if our prototype fits its designated place and if there are no problems with assembling it. Next, we test its functionality to make sure that the car part works perfectly well and meets all the criteria. Finally, we install the part in a test car to see if it works well during test drives.

  • 7


    Starting serial production is the final of the technological process. At this point, the most important thing is the quality control of the PMC Motorsport products. It assures us that all the criteria have been met and that our customers receive top quality products. We also make sure that our products are carefully packed and shipped. On top of that, we try hard to keep a positive atmosphere in contact with our clients.  


    PMC Motorsport Production Process | M113K - M57N



Copyrights 2019 © ALL RIGHT RESERVED | Powered by Quick.Cart | Design: